Skip to main content
Tekron & Trekre - Industrial valves
qiang@tekron.com.cn +86 510 88232303
Jiangsu Tekron

Industrial Valve Manufacturer

Enquiry

JIS 20K metal hard sealed double flange butterfly valve

JIS 20K metal hard sealed double flange butterfly valve

Product parameters

JIS 20K metal hard sealed double flange butterfly valve can be used as a metal seat or elastic seat. The main body is made of carbon steel or stainless steel. Valve cores and stems can be produced according to customer requirements. The conventional method is worm gear transmission, which can also be made into pneumatic actuators. Automatic operation of actuators or electric actuators.

JIS 20K金属硬密封双法兰蝶阀

Series selection and configuration options

Body material optionsCarbon steel or stainless body options; disc, stem and metal seat specified separately
Drive configurationStandard manual worm gear; pneumatic or electric packages selected separately

Standard series ranges and custom manufacture are separate. Smaller or larger sizes, special materials and tooling can be evaluated on request; design and quotation must be agreed. Not every size, material, seat and rating combination is interchangeable.

This product belongs to our butterfly valve range. For sizing, pressure rating, material and actuator selection, see our valve technical resources.

Related products

Explore more products in this valve category.

Two way hard to hard all metal hard sealed butterfly valve Two way hard to hard all metal hard sealed butterfly valve Fully lined EPDM rubber lug butterfly valve Fully lined EPDM rubber lug butterfly valve High performance clamp butterfly valve with smooth stem High performance clamp butterfly valve with smooth stem Ductile iron QT450 handle lug butterfly valve Ductile iron QT450 handle lug butterfly valve Butterfly valve with limit switch signal feedback Butterfly valve with limit switch signal feedback Lock key switch anti-theft butterfly valve Lock key switch anti-theft butterfly valve
View all butterfly valve
Tekron & Trekre

Butterfly Valve FAQs

01 Which butterfly valve seat design should be used?
Common designs include resilient seats and metal seats. Resilient-seated valves are generally used for water, air and low-leakage services at moderate temperatures. Metal-seated valves are selected for higher temperature, pressure or erosive industrial media. The final choice depends on the medium, temperature, pressure and required leakage class.
02 How do wafer, flanged and lug butterfly valves differ?
Wafer valves are compact and require little installation space. Flanged valves provide a stable pipeline connection for larger sizes or higher pipe loads. Lug valves can facilitate one-sided removal and maintenance. Selection depends on the piping standard, space, size and maintenance method.
03 Should a butterfly valve use pneumatic, electric or manual actuation?
Manual or gearbox operation suits local isolation. Pneumatic actuators provide fast response for frequent operation and hazardous areas. Electric actuators support remote control and modulation. The actuator must be sized for valve size, differential pressure, torque and control signal.
04 Which operating data are required for butterfly valve selection?
Provide the medium, design temperature, design pressure, nominal size, connection standard, body and seat materials, leakage class, flow direction, operating frequency, actuation method and any enclosure or explosion-protection requirements.

Discuss your valve configuration and quotation

Complete the details you know; leave unknown operating conditions blank. Name, email and enquiry are required. Phone is optional.

Add operating and connection requirements (optional)

Include units. PN and ASME Class are separate designations, not a fixed conversion.

Email drawings, nameplate photos or technical files with the product link. This form does not accept attachments. [email protected]