Skip to main content
Sino foreign joint venture valve brand
简体中文简体中文 JapaneseJapanese KoreanKorean RussianRussian 繁体中文繁体中文 EspañolEspañol qiang@tekron.com.cn +86 510 88232303
Tekron · Trekre
Enquiry

Flange butterfly valve

A flanged butterfly valve connects to the pipeline through its specified flange arrangement. Single-flange and double-flange bodies are distinct configurations and must match the approved drawing.

Flanged butterfly valves: compare construction, connections and application requirements. Confirm materials, operating conditions and complete-valve ratings for your project.

    0 page(s), 0 item(s)

Flanged butterfly valves — Selection and installation guide

Design and application checks

A flanged butterfly valve connects to the pipeline through its specified flange arrangement. Single-flange and double-flange bodies are distinct configurations and must match the approved drawing.

Check face-to-face length, flange drilling, facing, bolt access and disc clearance. A flanged connection alone does not determine seat type, offset geometry, flow direction or pressure–temperature capability.

What should I provide for a quotation?

Provide the fluid and composition, solids content, normal and design pressure and temperature, DN or NPS, connection standard, installation orientation, operating duty and required inspection documents. State any corrosion, vacuum, fire-safety or emissions requirements separately.

How do I confirm the pressure and temperature rating?

Use the approved data sheet, nameplate and pressure–temperature limits for the complete valve, including its seat, lining and seals. PN, ASME Class and JIS K are different designation systems, not a fixed numerical conversion. A shared nominal size does not establish flange interchangeability.

What must be checked before installation?

Compare the face-to-face dimension, flange drilling and facing, pipe bore, flow direction and maintenance clearance with the approved drawing. Clean and isolate the pipeline, release pressure and follow the product installation instructions. Do not use flange bolts to pull misaligned pipework into position.

Related product categories

Tekron & Trekre

Butterfly Valve FAQs

01 Which butterfly valve seat design should be used?
Common designs include resilient seats and metal seats. Resilient-seated valves are generally used for water, air and low-leakage services at moderate temperatures. Metal-seated valves are selected for higher temperature, pressure or erosive industrial media. The final choice depends on the medium, temperature, pressure and required leakage class.
02 How do wafer, flanged and lug butterfly valves differ?
Wafer valves are compact and require little installation space. Flanged valves provide a stable pipeline connection for larger sizes or higher pipe loads. Lug valves can facilitate one-sided removal and maintenance. Selection depends on the piping standard, space, size and maintenance method.
03 Should a butterfly valve use pneumatic, electric or manual actuation?
Manual or gearbox operation suits local isolation. Pneumatic actuators provide fast response for frequent operation and hazardous areas. Electric actuators support remote control and modulation. The actuator must be sized for valve size, differential pressure, torque and control signal.
04 Which operating data are required for butterfly valve selection?
Provide the medium, design temperature, design pressure, nominal size, connection standard, body and seat materials, leakage class, flow direction, operating frequency, actuation method and any enclosure or explosion-protection requirements.

Discuss your valve configuration and quotation

Complete the details you know; leave unknown operating conditions blank. Name, email and enquiry are required. Phone is optional.

Add operating and connection requirements (optional)

Include units. PN and ASME Class are separate designations, not a fixed conversion.

Email drawings, nameplate photos or technical files with the product link. This form does not accept attachments. [email protected]