Skip to main content
Trekre - Industrial valves
qiang@tekron.com.cn +86 510 88232303
Trekre

Industrial Valve Manufacturer

Enquiry

What does RF flange valve mean?

" RF" In the field of valves, it usually represents the abbreviation of Raised Face, which describes the raised sealing face of a flange, not a valve operating type. Raised Face flange is a standard flange interface used to connect valves, pipelines, and other equipment. The characteristic of the Raised Face flange is that there is a slightly raised plane on the surface of the flange, which is used to tightly seal the interface between the two flanges.

RF的法兰阀门是什么意思?(图1)

RF flange valves are typically connected to RF flanges to ensure sealing performance. The allowable pressure and temperature depend on the applicable flange standard, material and pressure class, together with the gasket and bolting. RF alone does not establish a high-pressure or high-temperature rating.

Therefore, RF flange valves refer to valves connected using Raised Face flanges, with the face, gasket and fasteners selected for the actual piping connection and service.

Tekron & Trekre

Valve Knowledge

01 What is the low leakage test? What are the differences between ISO 15848 and API 624?
The low leakage test focuses on the leakage emissions from parts such as the valve stem packing, and is different from the purpose of the valve seat sealing test. ISO 15848-1 stipulates the type tests and grades for the leakage emissions of industrial valves; API 624 stipulates the type tests for valves with graphite packing and moving valve stems. The applicable scope, circulation conditions, measurement methods and acceptance criteria of the two are different. The project should clearly specify the adopted standard and version.

Discuss your valve configuration and quotation

For overseas project enquiries: Trekre.

Complete the details you know; leave unknown operating conditions blank. Name, email and enquiry are required. Phone is optional.

Add operating and connection requirements (optional)

Include units. PN and ASME Class are separate designations, not a fixed conversion.

Email drawings, nameplate photos or technical files with the product link. This form does not accept attachments. [email protected]