简体中文
Japanese
Korean
Russian
繁体中文
Español
Valve Types
Valve category
Compare industrial valve types including ball, butterfly, gate, globe, check and control valves. Find materials, actuation options and application guidance.
Three piece forged hard seal ball valve
Integrated ball valve with worm gear and worm gear installation
Pneumatic extension rod discharge flange ball valve
1.4462 duplex stainless steel 2205 American standard flange ball valve
Double directional hard contact hard rotary ball valve IGWXDF3204Y
Pneumatic three-way Y-shaped switching ball valve 135 angle
Stainless steel 304 electric clamp penetrating knife gate valve
Umbrella gear worm gear manual stainless steel 304 penetrating knife gate valve
Electric switch type intelligent rising stem knife gate valve
Pneumatic knife type flange slurry valve
Pneumatic slurry knife gate valve
Manual knife type flange slurry valve
Pneumatic thin film heat dissipation plate high temperature regulating valve - WCB carbon steel
Pneumatic extended stem stainless steel CF8 flange ball valve CQ941F
Q347F-16C/P worm gear fixed ball flange ball valve
Stainless steel three piece forged flange ball valve
Stainless steel DIN flange ball valve
Cast steel WCB flange American standard ball valve Class300
F304 forged stainless steel American standard ball valve 300LB
Stainless steel CF8 extended rod flange ball valve
Q41H metal hard seal flange ball valve
Worm gear switch American standard flange ball valve CL600
Hand cranked flange American standard ball valve Class600
WCB carbon steel three-way directional ball valve with platform bracket
Stainless steel three-way directional valve L channel T channel
KS stainless steel Korean standard flange ball valve
Japanese standard JIS10K flange ball valve SCS13 SCS14
Japanese standard JIS20K stainless steel ball valve SCS13 SCS14
Stainless steel American standard ANSI Class150 # flange ball valve
RTJ ring connection surface stainless steel flange ball valve
Valve type selection comparison
Use this table for initial comparison only. Final selection must be checked against the medium, pressure, temperature, leakage class, piping standard and actuation requirements.
| Type | Primary function | Typical strength | Selection caution |
|---|---|---|---|
| Ball valve | Isolation | Low flow resistance; quarter-turn operation | Check seat compatibility, temperature and cavity pressure |
| Butterfly valve | Isolation/control | Compact at medium and large sizes | Check differential pressure, seat design and torque |
| Gate valve | Full-open/full-close | Low resistance when fully open | Not normally used for continuous throttling |
| Globe valve | Throttling/isolation | Stable flow regulation | Allow for a higher pressure drop |