简体中文
Japanese
Korean
Russian
繁体中文
Español
Valve Types
Valve category
Compare industrial valve types including ball, butterfly, gate, globe, check and control valves. Find materials, actuation options and application guidance.
High performance light rod convex ear butterfly valve with double eccentricity
Worm gear high-performance butterfly valve D372F
Chain type switch flange butterfly valve
Insulated jacket flange butterfly valve - hard seal BWD343H
Four way flange ball valve - Double L directional ball valve
Stainless steel flange bottom valve Japanese standard JIS10K
JIS20K Japanese standard lift check valve SCS13 SCS14
JIS 10K Japanese standard flange lift check valve
JIS10K Japanese standard clamp check valve SCS13/SCS14
ANSI Class600 American standard swing check valve
JIS20K flange swing check valve
JIS10K Japanese standard rotary check valve
American standard swing check valve ANSI Class150
ANSI Class300LB American standard swing flange check valve
Electric Lug Butterfly Valve - Single Clamp/Supporting Ear
Manual electric flange ball valve - dual-use
3PC electric threaded ball valve 1000WOG&2000WOG
Electric three-way reversing flange ball valve T-shaped/L-type
Electric fluorine lined regulating valve PFA/FEP/PTFE
Electric three-way American standard ball valve
Electric stainless steel 304 lug butterfly valve
Wear resistant knife gate valve with bi-directional sealing
Polyurethane lined knife gate valve with bi-directional sealing
Two piece valve body knife gate valve - combination type
Bidirectional fully lined rubber clamped gate valve
Pneumatic square knife gate valve
Pneumatic one-way sealed slag discharge knife gate valve
Penetrating blade type gate valve
Manual one-way sealing knife gate valve
DIN F4 German standard elastic seat sealing flange gate valve
Valve type selection comparison
Use this table for initial comparison only. Final selection must be checked against the medium, pressure, temperature, leakage class, piping standard and actuation requirements.
| Type | Primary function | Typical strength | Selection caution |
|---|---|---|---|
| Ball valve | Isolation | Low flow resistance; quarter-turn operation | Check seat compatibility, temperature and cavity pressure |
| Butterfly valve | Isolation/control | Compact at medium and large sizes | Check differential pressure, seat design and torque |
| Gate valve | Full-open/full-close | Low resistance when fully open | Not normally used for continuous throttling |
| Globe valve | Throttling/isolation | Stable flow regulation | Allow for a higher pressure drop |