Application and package scope
Combines a motor drive, position sensing and a control module in a part-turn actuator. Depending on configuration, it supports remote on/off operation or valve-position control. Specify control inputs, position feedback and local operation separately; the integrated designation does not mean every function is included.
Configuration options and purchasing checks
| Item | Configuration |
|---|---|
| Output motion | Part-turn, typically approximately 90° |
| Control version | On/off or modulating, according to the selected control module |
| Control input | Discrete commands or 4–20mA, according to version |
| Feedback output | End-position or continuous position feedback; specify separately |
| Power-supply options | AC220V or AC380V; confirm any DC24V option for the specific series |
| Mating valves | Ball valves, butterfly valves and other compatible part-turn valves |
Valve position does not guarantee flow
The position-control loop makes actual travel follow the setpoint. Flow also depends on the valve characteristic, differential pressure and piping resistance. A percentage of valve travel is not the same percentage of flow.
Check the duty rating for continuous modulation
Frequent small movements differ from occasional full-stroke operation. Select the version for modulating torque, start frequency, motor temperature rise, mechanical backlash and the normal travel range, rather than checking maximum output torque alone.
I/O schedule and environmental requirements
The purchasing I/O schedule should separately identify setpoint inputs, position outputs, open/closed indications and fault alarms. Outdoor suitability, explosion protection, power-failure action and special protection must each be specified; a smart module does not automatically provide them.
Enquiry and supply documents
Provide the mating valve, load or service conditions, interface drawing, utility and control requirements, environment and quantity. Jiangsu Tekron Flow Control Valve Co., Ltd. can discuss a suitable configuration on this basis. The final model, accessories, drawings and inspection requirements are subject to the agreed technical specification.
Product photographs illustrate a configuration; not every accessory shown is automatically included in the supply.
Related categories:Valve actuators and accessories · Electric actuated valves · Pneumatic valves · Control valves
Selection questions
Does a 4–20mA input automatically include feedback with the same range?
No. Control input and position feedback are separate interfaces. Specify the feedback module, terminals and range separately.
Does intermediate positioning prove suitability for continuous modulation?
No. Check actuator duty, permitted operating frequency, modulating load and the valve's suitability for throttling.
What is needed to match a smart actuator to an existing control cabinet?
Provide the power conditions, I/O schedule, valve load and interface drawing. Then check the input/output types, control direction and failure-response requirements.