Skip to main content
Trekre - Industrial valves
qiang@tekron.com.cn +86 510 88232303
Trekre

Industrial Valve Manufacturer

Enquiry

Electropneumatic Control-Valve Positioner

Electropneumatic Control-Valve Positioner

Product parameters

Application and package scope

Receives a position setpoint from the control system and uses actual valve-position feedback to adjust pneumatic output, moving the actuator towards the target. A positioner is a control accessory, not the driving air supply or a complete control valve with body and actuator.

Configuration options and purchasing checks

ItemConfiguration
Typical control input4–20mA; direct/reverse action and range per configuration
Compatible equipmentCompatible linear or part-turn pneumatic actuators
Pneumatic outputSelect single-acting or double-acting versions separately
Valve-position feedbackSeparate feedback module, where required
Smart functionsHART or diagnostic functions only on supporting versions
Air supply and mountingSpecify supply air, filter regulator, bracket and feedback linkage separately

Control input and feedback output have different directions

The control system sends a setpoint to the positioner; a feedback module returns actual valve position to the system. Do not interchange the connections merely because both use 4–20mA. Check terminal definitions, ranges and signal directions against the actual wiring diagram.

Match output channels to the actuator

Spring-return single-acting actuators and double-acting cylinders require different pneumatic output arrangements. Also check linear or rotary travel, feedback linkage or rotary coupling, air pressure and mounting space; signal range alone is insufficient.

Check pneumatic conditions even when the signal is normal

A positioner does not generate its own motive power. Low air supply, leakage, blocked filtration or abnormal valve resistance can prevent the target position being reached. Qualified personnel must follow equipment instructions and site safety procedures for maintenance.

Enquiry and supply documents

Provide the mating valve, load or service conditions, interface drawing, utility and control requirements, environment and quantity. Jiangsu Tekron Flow Control Valve Co., Ltd. can discuss a suitable configuration on this basis. The final model, accessories, drawings and inspection requirements are subject to the agreed technical specification.

Product photographs illustrate a configuration; not every accessory shown is automatically included. Third-party branding identifies the illustrated accessory. Confirm the brand and model offered separately; the photograph does not imply that this company manufactures the third-party product or owns its trademark.

Related categories:Valve actuators and accessories · Electric actuated valves · Pneumatic valves · Control valves

Selection questions

Can a positioner operate a valve without an air supply?

No. The electrical signal carries the setpoint. Suitable instrument air and the actuator provide the actual pneumatic driving force.

Can a single-acting positioner directly control a double-acting cylinder?

Do not assume interchangeability. Check positioner output channels, actuator action and the pneumatic circuit, and select the matching version.

Does a communication option include feedback and mounting hardware?

No. Specify communications, analogue feedback, bracket, feedback linkage and air-supply accessories individually in the configuration list.

Discuss your valve configuration and quotation

For overseas project enquiries: Trekre.

Complete the details you know; leave unknown operating conditions blank. Name, email and enquiry are required. Phone is optional.

Add operating and connection requirements (optional)

Include units. PN and ASME Class are separate designations, not a fixed conversion.

Email drawings, nameplate photos or technical files with the product link. This form does not accept attachments. [email protected]