Skip to main content
Trekre - Industrial valves
qiang@tekron.com.cn +86 510 88232303
Trekre

Industrial Valve Manufacturer

Enquiry

Chain-Operated Manual Worm-Gear Actuator

Chain-Operated Manual Worm-Gear Actuator

Product parameters

Application and package scope

A chain extends the manual operating position, driving compatible part-turn valves through a worm gearbox. Intended for layouts where operating height or space limits access. Check valve load, interfaces and the chain route together.

Configuration options and purchasing checks

ItemConfiguration
InputManually pulled chain and input chainwheel
TransmissionWorm-and-wheel reduction gearing
Output referencePart-turn, typically 90°
Housing referenceDuctile-iron option; actual material per selected model
Mating valvesCompatible ball valves, butterfly valves and other part-turn valves
Mounting and indicationInterface, operating direction and position indication per drawing

Plan operating height and chain route together

Provide suitable operating space and an accessible chain position, avoiding interference with equipment, access routes or moving parts. Determine mounting orientation and support from the site layout and product instructions. Valve size alone is not enough for ordering.

Mechanical advantage does not permit unlimited force

The gear ratio affects input force and operating turns, while actual effort also depends on efficiency, valve resistance and installation. Do not keep increasing force when abnormal sticking occurs; qualified personnel should investigate the cause.

Connection and inspection documents

Provide stem-end dimensions, mounting holes, travel, operating direction and required output torque. Check the interface against applicable ISO 5211 data, while verifying the actual drawing's coupling, hole pattern and load capacity.

Enquiry and supply documents

Provide the mating valve, load or service conditions, interface drawing, utility and control requirements, environment and quantity. Jiangsu Tekron Flow Control Valve Co., Ltd. can discuss a suitable configuration on this basis. The final model, accessories, drawings and inspection requirements are subject to the agreed technical specification.

Product photographs illustrate a configuration; not every accessory shown is automatically included in the supply.

Related categories:Valve actuators and accessories · Electric actuated valves · Pneumatic valves · Control valves

Selection questions

Can a chain operator be fitted directly to any elevated valve?

No. First check valve motion, operating torque and interfaces, then the installation height, chain route and available operating space.

Can a manual worm-gear operator replace an electric interlocked shutdown?

A purely manual chain operator requires a person to operate it and cannot perform an automatic interlock action. Select a suitable powered arrangement where automatic control is required.

What is needed to specify a position indicator?

Provide the opening/closing direction, actual travel, viewing position and mounting space so that the indication range matches valve position.

Discuss your valve configuration and quotation

For overseas project enquiries: Trekre.

Complete the details you know; leave unknown operating conditions blank. Name, email and enquiry are required. Phone is optional.

Add operating and connection requirements (optional)

Include units. PN and ASME Class are separate designations, not a fixed conversion.

Email drawings, nameplate photos or technical files with the product link. This form does not accept attachments. [email protected]