Skip to main content
Trekre - Industrial valves
qiang@tekron.com.cn +86 510 88232303
Trekre

Industrial Valve Manufacturer

Enquiry

Linear Pneumatic Diaphragm Actuator

Linear Pneumatic Diaphragm Actuator

Product parameters

Application and package scope

Air pressure acting on the effective diaphragm area produces thrust along the valve stem, commonly for linear control valves. The diaphragm, spring and process load jointly determine usable output. Check travel, maximum differential pressure and fail-safe position together.

Configuration options and purchasing checks

ItemConfiguration
MotionReciprocating linear movement
Drive and returnInstrument-air drive; spring-return arrangement per selected model
Output criteriaThrust and travel per matched model data
Action directionDirect or reverse action, checked against valve opening/closing direction
Continuous controlSuitable positioner for closed-loop valve-position control
Supply scopeList actuator, positioner and complete control-valve package separately

Allow for actual opposing forces when checking thrust

Not all diaphragm force is available to move the valve plug. It must also overcome spring force, unbalanced plug force, packing friction and other resistance. Determine thrust at the maximum operating differential pressure and actual air-supply conditions, rather than selecting by valve DN alone.

Spring range is not maximum supply pressure

Spring range describes the relationship between spring preload, diaphragm pressure and rated travel. Check the permissible supply conditions of the positioner and actuator separately; these are not the same specification.

Establish failure position for the complete valve

Direct or reverse actuator action describes the relationship between air pressure and stem movement; it does not by itself establish air-to-open or air-to-close valve action. Confirm fail-open or fail-close from plug closing direction, assembly and control documents.

Enquiry and supply documents

Provide the mating valve, load or service conditions, interface drawing, utility and control requirements, environment and quantity. Jiangsu Tekron Flow Control Valve Co., Ltd. can discuss a suitable configuration on this basis. The final model, accessories, drawings and inspection requirements are subject to the agreed technical specification.

Product photographs illustrate a configuration; not every accessory shown is automatically included in the supply.

Related categories:Valve actuators and accessories · Electric actuated valves · Pneumatic valves · Control valves

Selection questions

Does a larger diaphragm always close a valve against higher differential pressure?

Diaphragm area alone is insufficient. Check air supply, spring, plug forces, travel and packing friction to determine usable closing thrust.

Does an actuator-only purchase automatically include a positioner?

No. List the positioner, mounting and feedback linkage, and air-supply accessories separately. Match them as a package when ordering a complete control valve.

Does a direct-acting actuator always fail closed?

No. Actuator motion combined with the valve closing direction determines the complete valve's failure position. Use the assembly and control documents.

Discuss your valve configuration and quotation

For overseas project enquiries: Trekre.

Complete the details you know; leave unknown operating conditions blank. Name, email and enquiry are required. Phone is optional.

Add operating and connection requirements (optional)

Include units. PN and ASME Class are separate designations, not a fixed conversion.

Email drawings, nameplate photos or technical files with the product link. This form does not accept attachments. [email protected]