Skip to main content
Trekre - Industrial valves
qiang@tekron.com.cn +86 510 88232303
Trekre

Industrial Valve Manufacturer

Enquiry

Outdoor Double-Acting Pneumatic Actuator

Outdoor Double-Acting Pneumatic Actuator

Product parameters

Application and package scope

A double-acting pneumatic package for outdoor, dusty or damp environments. Selection includes housing seals, air quality and accessory installation. Specify ingress protection and explosion protection separately; appearance or a series name is not proof of a protection rating.

Configuration options and purchasing checks

ItemConfiguration
Drive typeDouble-acting rack-and-pinion, typically 90° partial rotation
Housing and end capsSelect materials and seals for the environment and actual model
Air-supply referenceTypically 0.4~0.7MPa; rated and maximum supply conditions per nameplate
Environmental conditionsSpecify location, dust, moisture, temperature and corrosive exposure
Control accessoriesSelect solenoid valve, limit switches, filter regulator and positioner for the required functions
Air-failure strategyNo assumed return or position holding; confirm against the complete valve and air-circuit design

Specify environmental conditions for every accessory

A suitable actuator housing does not establish that solenoid coils, feedback switches, cable entries and pneumatic fittings meet the same site requirements. Include mounting orientation, protection requirements and ambient temperature for the full accessory package.

Check ingress protection and hazardous-area requirements separately

Dust and water protection concerns environmental ingress. Explosion protection concerns the protection method and suitability for a specified hazardous area. Check the actual accessories and supply certificates where explosion protection is required; pneumatic drive alone does not qualify the electrical package.

Provide suitable air supply and maintenance access

Water, particles and oil in the air supply can affect pneumatic components. Plan filtration and regulation, exhaust direction, maintenance space and support for the actual layout. Verify operating time under the agreed load conditions.

Enquiry and supply documents

Provide the mating valve, load or service conditions, interface drawing, utility and control requirements, environment and quantity. Jiangsu Tekron Flow Control Valve Co., Ltd. can discuss a suitable configuration on this basis. The final model, accessories, drawings and inspection requirements are subject to the agreed technical specification.

Product photographs illustrate a configuration; not every accessory shown is automatically included in the supply.

Related categories:Valve actuators and accessories · Electric actuated valves · Pneumatic valves · Control valves

Selection questions

If the actuator protection is suitable, do accessories still need separate checks?

Yes. Solenoid valves, feedback switches, fittings and cable entries have their own limits. Check each item for the complete installation environment.

Does an outdoor-protected actuator also have explosion protection?

No. Dust and water protection is different from explosion protection. Hazardous-area use requires verification of the applicable protection method and actual supply documents.

What information is needed for outdoor winter service?

State the minimum ambient temperature, air-drying conditions, possible condensation or freezing, and the temperature limits of accessories and seals.

Discuss your valve configuration and quotation

For overseas project enquiries: Trekre.

Complete the details you know; leave unknown operating conditions blank. Name, email and enquiry are required. Phone is optional.

Add operating and connection requirements (optional)

Include units. PN and ASME Class are separate designations, not a fixed conversion.

Email drawings, nameplate photos or technical files with the product link. This form does not accept attachments. [email protected]